Skip to content
Australian Doorman

Automation & openers · Brisbane northside

Garage door automation — for the door you already have.

Add an opener to a manual door, replace a motor that has finally given up, or get the one you have working properly again. We'll tell you which of those it actually is before recommending anything.

  • Automate existing doors
  • Motor & drive unit replacement
  • Opener repairs, remotes & phone control
Technician on a step ladder lifting a matte-black garage door opener onto its ceiling rail

Repair or replace?

Older doesn't always mean finished.

A lot of northside homes have an opener that's 10, 15 or 20 years old. Some of those are worth repairing; some aren't. The honest answer depends on what's failed, whether parts are still practical for that model, and what a repair would cost against a new unit.

We'll look at the door as well as the motor — a unit that's straining against a heavy, unbalanced door will fail again, whatever's bolted to the ceiling. Then you get both numbers, repair and replace, and the recommendation. No pressure either way.

  • 10–15 yrs

    typical drive-unit life before parts get scarce

  • Both

    prices — repair and replace — before you decide

  • Phone

    control where the system supports it

Pricing

What does a new opener cost?

It depends on the door, the drive type and the features you actually want. We look at the door first, then quote a suitable opener installed and programmed — with your remotes and, where supported, phone control set up before we leave.

What goes into an installation
!

Before you buy a new remote

A remote that's stopped working is usually a battery, a lost code or a receiver — not a reason for a new opener. Bring the remote to the phone call; we can often tell you what it needs before anyone drives anywhere.

Brands & systems

We work on most common residential brands — older and newer.

Independent technician. We service and repair these systems; we don't act as a dealer or warranty agent for any manufacturer.

  • Merlin
  • Gliderol
  • ATA — Automatic Technology
  • B&D
  • Steel-Line
  • Superlift
  • Boss
  • Centurion
  • Stratco

How it works

Straightforward from the first call.

  1. 01

    Tell us what it’s doing

    Call or send an enquiry. We'll ask how old the door is, what happened before the fault, and whether anything's been tried.

  2. 02

    We inspect it properly

    The whole door system — not just the part that looks broken. Developing wear gets pointed out, not hidden.

  3. 03

    You get the price first

    What's wrong, what needs doing now, what can wait. Then the price. No pressure to proceed.

  4. 04

    Fixed, often on the spot

    If parts are on the van, the repair is usually done the same visit. If not, we return promptly — generally within a couple of days.

Automation — straight answers

Questions we get about openers.

Can’t see yours? Ask on the phone — it’s usually a two-minute answer.

0408 190 595
  • Usually, yes. Most standard sectional, roller and tilt doors in good mechanical condition can take an opener without replacing the door. We check that the door balances and runs freely first — if it needs a service, that comes before the opener.

Get it sorted

Tell us what the door is doing.

Call for the quickest answer. Or send the details and we'll come back to you — a photo of the door helps.

Quickest answer0408 190 595
  • Brisbane northside to Caboolture, plus the bayside, southside and west
  • Residential doors only
  • Price before we proceed
  • info@australiandoorman.com.au

We only use these details to reply about your door. Protected by hCaptcha — its privacy policy and terms apply.